BMW SPECIFICATIONS AND ADJUSTMENTS
TIRE INFLATION (COLD)
Before attempting to check or adjust wheel alignment, ensure tires are properly inflated. The 2002 series requires 26 psi front and rear. The 3.0 series require 30 psi front and rear. The 530i series requires 28 psi front and 26 psi rear.
CASTER AND CAMBER
All Models - Before checking caster and camber, vehicle must be in loaded condition. Loaded condition consists of two 143 lbs. weights on front seat, one 143 lbs. weight on rear seat, gas tank full and 66 lbs. on left side of luggage compartment. If caster and camber are not within specifications check suspension for damage. Repair or replace parts as necessary.
TOE-IN
All Models - Before checking toe-in, vehicle must be in loaded condition (see Caster and Camber). Check toe-in with front wheels in straight-ahead position. If not within specifications, loosen tie rod clamping bolts. Rotate both tie rod tubes until toe-in is within specifications. Tighten clamping bolts.
